Skoda SUPERB Owner's Manual page 198

Guide along a saved waypoint tour
Fig. 245 Display a waypoint / guide along a waypoint tour
Start guidance
›
In the Waypoint mode main menu, tap on the function surface  → Waypoint
memory.
›
Select the desired route from the displayed list.
›
Tap on the function surface  .
›
Select one of the following menus
Reverse tour - Reverse the order of waypoints (suitable for guiding along a
■
waypoint tour in the reverse direction)
Next waypoint. - Skip to the next waypoint
■
Start - starts route guidance
■
Route guidance
During the guidance along a waypoint tour, no nav. announcements are made
by Infotainment.
When driving along the waypoint tour shown, follow as closely as possible the
information shown on the Infotainment screen.
While driving along a waypoint tour, the split screen shows the Waypoints and
the direction to drive as well as the distance to the next waypoint, the se-
quence number of the next waypoint and the total number of waypoints
» Fig. 245.
The waypoint tour from the vehicle position to the next waypoint "reduces"
continuously while driving " "
C
If you drive past but very close to the next waypoint, the route guidance will
continue with the subsequent waypoint.
196
Infotainment
» Fig. 245.
A
» Fig. 245 .
If you drive past a waypoint and this does "not disappear" from the waypoint
tour (e.g. because the distance to this waypoint is too large), then there is the
option to "skip" over this waypoint and continue the guidance to the next way-
point.
In the Waypoint mode main menu, tap on function surface  → Skip waypoint.
▶
Stop route guidance
▶ In the Waypoint mode main menu, tap on function surface  → Stop route guid-
ance.
The guidance also stops when waypoint mode is exited.
Manage waypoint tour memory
›
to display a list of saved and imported waypoint tours, from main menu
Waypoint mode, tap the function surface  → Waypoint memory.
The name of the waypoint tour, the date and time of storage and the number
of waypoints appears in the function surface for the waypoint tour.
›
Choose the desired waypoint tour, and then select one of the following menu
items.
Store the waypoint tour on the SD card

Delete the waypoint tour

Rename the waypoint tour

Display the waypoint tour

Import waypoint tour from the SD card
In the Waypoint mode main menu, tap on the function surface  → Waypoint
▶
memory → Import.
▶ Select the source of the waypoint tour recording and confirm the import.
B
» Fig. 245 on page 196