Skoda SUPERB Owner's Manual page 133

Operation principle
In the voice control main menu » Fig. 184
commands for the individual menus.
Other voice commands are displayed by tapping the respective functional area
or issuing the name of the respective command (e.g. Navigation). The screen
shows the following » Fig. 185.
Context-dependent:
A

▶ The system is waiting for a voice command

▶ The system recognises a voice command

The system plays a message
▶

Voice command entry was stopped
▶
Available list entries
B
Possible voice commands
C
Display other possible voice commands

Voice commands that can be issued, are indicated in "quotation marks".
Note
The display of the voice control symbols
equipment fitted also on the display of the instrument cluster.
Fig. 185
Example of screen display
on page 130 There are basic voice
» Fig. 185 are dependent of the
A
Voice commands
Enter
The voice command must only be issued when the symbol
the Infotainment screen and the input tone has completely faded. The input
tone can be switched on / off. To do so, tap the
function surface  → Voice control.
It is not necessary to wait for the end of message playback when Infotainment
is playing a message. The Infotainment message can be acknowledged by tap-
ping the sensor field (does not apply to Infotainment Columbus) or press-

ing the button  on the multifunction steering wheel. Then a voice command
can be issued. The voice control is hereby much faster.
Stop
This allows for more time for input of the voice command (e.g. in the list of
visited contacts).
The process for the voice command input can be stopped by moving a finger
up/down across the screen or by turning the controller  (not applicable to In-
fotainment Columbus).
When stopping, the symbol changes
Restore
The procedure for voice command input can be restarted in one of the follow-
ing ways.
▶ By tapping on the function surface .
▶ By tapping the sensor field on the Infotainment (does not apply to Info-

tainment Columbus).
By pressing the key  on the multifunction steering wheel.
▶
Not recognising a voice command
If a voice command is not detected three times in succession by Infotainment,
then the voice control is stopped.
Correction of a voice command input
A voice command can be corrected, modified or re-entered by tapping the
sensor field (does not apply to Infotainment Columbus) or pressing the

button  on the multifunction steering wheel. However, this is only possible
as long as the symbol appears on the screen.

You do not have to wait until the voice command is recognised by Infotain-
ment.
is displayed in

sensor field and then the

from
.
Infotainment operation

131