Table of Contents
Advertisement
172 Storage space and interior equipment ›
Net partition
Attach the net partition
Attach at the back
›
Place the crossbar in the supports
›
Snap the carabiners
into the lashing eyes.
B
›
Pull the straps firmly at the free ends
Fasten in the front
The procedure is analogous to the process behind.
The lashing eyes for the carabiner are located under
the central body pillars.
Loosening
Loosening takes place in the reverse order to fixing.
Double-sided floor covering
Overview
Depending on the equipment, the vehicle may be
equipped with a double-sided floor covering in the
luggage compartment. One side is made of fabric,
the other side is washable.
Rigid boot cover
Removing and inserting
The maximum load of the other fastening nets is
1 kg.
Removing
Net partition
.
A
.
C
›
Unhook the straps.
Inserting
›
Insert the cover until it clicks into place.
›
Hook in the retaining straps.
Store the cover behind the rear seats
Variable loading floor in the boot
Setting the position
The maximum load of the variable loading floor is
75 kg.
Set the variable loading floor to the upper or lower
position
Remove the cover by
pulling it quickly.
The cover is released by
slowly pulling on the
floor of the boot.
›
Hook the cover behind
the rear seats.
›
Lift the variable load
floor and pull it to-
wards you.
›
To set in the upper po-
sition, place the varia-
ble loading floor in the
front area on area
.
A
›
To set in the lower po-
sition, place the varia-
ble loading floor in the
front area on space
.
B
Hide quick links:
Advertisement
Table of Contents
