Skoda SUPERB Owner's Manual page 84

Convenience operation of the front passenger seat

Read and observe on page 80 first.
The front passenger seat can also be operated from the rear seats, by pressing
the respective operating element in the direction of the arrows
Adjusting the angle of the seat backrest
A
Adjusting a seat in a forward/back direction
B
Memory Function of the electrically adjustable seat

Read and observe on page 80 first.
Among the memory buttons
B
seat and exterior mirror position can be saved
Storing seat and exterior mirror settings for driving forward
›
Switch on the ignition, adjust the seat and the exterior mirrors, as required.
›
Press the  » Fig. 84 button and then, within 10 seconds, press the de-
A
sired memory button . Storing is confirmed by an acoustic signal.
B
82
Using the system
Fig. 83
Operating elements on the front
passenger's seat
» Fig.
Fig. 84
SET button and memory but-
tons
on the driver's seat, a setting for the driver´s
» Fig. 84.
Storing front passenger´s exterior mirror settings for reversing
The function for lowering the front passenger's mirror area during reversing
can be activated in Infotainment in the menu
›
Turn on the ignition and press the desired memory button
›
Turn the rotary knob for the exterior mirror control to the position for the
front passenger mirror area
›
Engage reverse gear.
›
Adjust the front passenger's mirror to the desired position.
›
Disengage reverse gear. The set position of the exterior mirror is stored.
Retrieving the saved setting
›
With the ignition off and the driver's door open-press- the desired memory
button B.
›
In other cases (e.g. if the ignition is switched on or the driver's door closed),
hold the button.
83.
Stopping the ongoing adjustment
›
Press any button on the seat that is to be set. The driver's seat can also be
stopped by pressing the  button on the radio-operated key.
Note
Every time you save new seat and exterior mirror settings for driving forwards,
you must also save the front passenger mirror setting for reversing again.
Memory function of the remote control key
Applies to vehicles that do not have the personalisation function.

Read and observe
Every time the vehicle is locked, the driver´s seat and exterior mirror settings
are saved and assigned to the key with which the vehicle was locked.
After the following unlocking of the vehicle with the same key and opening the
driver's door, the driver´s seat and exterior mirrors that are saved to this key
will be adopted.
This function can be used in Infotainment in the menu
tivated/deactivated).
Storing front passenger´s exterior mirror settings for reversing
The function for lowering the front passenger's mirror area during reversing
can be activated in Infotainment in the menu
/  →  → Mirrors and wipers.

» page 79.
on page 80 first.
/  →  → Seats (ac-

/  →  → Mirrors and wipers.

» Fig. 84.
B
