Emergency unlocking / unlocking of doors
Unlocking/locking the driver's door
Fig. 341 Handle on the driver's door: Open/unlock and lock cover
Fig. 342 Handle on the driver's door: Key with fold/out key bit/KESSY
key
The driver's door can be emergency unlocked / emergency locked using the
key via the lock cylinder.
›
Pull on the door handle and hold.
›
Insert the key into the recess on the lower side of the cover and fold up the
cover in the direction of arrow
›
Release the door handle.
›
For vehicles with LHD, insert the key with the fold-out key bit with the but-
tons facing upwards
» Fig. 342
the vehicle.
›
For vehicles with RHD, insert the key with the fold-out key bit with the but-
tons facing downwards into the lock and unlock/lock the vehicle.
288
Do-it-yourself
» Fig.
341.
- into the lock cylinder and unlock/lock
›
On vehicles with the KESSY system, insert the emergency key with the han-
dle facing downwards
» Fig. 342
the vehicle.
›
Pull on the door handle and hold.
›
Replace the cover.
CAUTION
Make sure you do not damage the paint when performing an emergency lock-
ing/unlocking.
Locking the door without locking cylinders
Fig. 343 Left door/right door
›
Open the corresponding door.
›
In vehicles with the panel
, remove this panel
A
›
Insert the key into the slot and turn in the direction of the arrow (sprung po-
sition).
›
Replace the cover
.
A
After closing, the door is locked.
- into the lock cylinder and unlock/lock
» Fig.
343.