Skoda SUPERB Owner's Manual page 230

Hide thumbs Also See for SUPERB:
Table of Contents

Advertisement

Parking
Fig. 282 To park in a parallel parking space: Display
Fig. 283 To park in a traverse parking space: Display
Read and observe
and
The system supports the driver when reverse parking in the parking space
found in a number of traverse and parallel parked vehicles.
Display view
» Fig. 282
or
» Fig. 283
Parking space recognised with the information to drive on
Parking space recognised with the information to reverse
Note to drive on to the parking space
Note to reverse to the parking space
Process for reverse parking
The parking space found is shown in the display
.
228
Driving
on page 226 first.
» Fig. 282
-  or
» Fig. 283
Continue driving forwards until  appears in the display.
Stop and ensure that the vehicle does not continue to move forward until the
parking procedure starts.
Select reverse gear or move the selector lever into position R.
As soon as the following message is shown in the display: Steering int. active. Be
mindful of your surroundings, let go of the steering wheel and the steering is tak-
en over by the system.
Observe the direct vicinity of the vehicle and reverse carefully.
If necessary, the parking procedure can be continued with further steps.
If the arrow in the information display is flashing to the front , engage
1st gear or move the selector lever into the position D/S.
The display shows the  icon (brake pedal).
Depress the brake pedal and wait until the steering wheel automatically ro-
tates into the required position, the symbol  goes out.
Carefully drive forwards.
If the backwards arrow is flashing in the display - , select reverse gear again
or move the selector lever into position R.
The display shows the  icon (brake pedal).
Depress the brake pedal and wait until the steering wheel automatically ro-
tates into the required position, the symbol  goes out.
Carefully move backwards.
You can repeat these steps several times in succession.
As soon as the parking procedure is complete, an audible signal sounds and the
following message appears in the display.
-

Advertisement

Table of Contents
loading

Table of Contents