Skoda SUPERB Owner's Manual page 195

A route destination
In the route plan, the following information is displayed at the destina-
tion» Fig. 241 - .
Area with functional surfaces
A
Destination information
B
Estimated time of arrival at destination / remaining driving time to desti-

nation
Remaining distance to the destination

Chosen route type (economic, fastest, shortest)
C
Current vehicle position (address / GPS coordinates)
D
The display of the arrival time or the remaining driving time can be adjusted as
follows.
▶ In the Navigation main menu, tap on the functional surface  → Advanced set-
tings → Time display:.
Several route destinations
In the route plan, the following information is displayed at the respective desti-
nations» Fig. 241 - .
Area with functional surfaces
A
Stopover (with sequential number)

Final destination

Estimated time of arrival at destination / stopover

Driving distance to destination / stopover

Substitution of destinations among themselves

Delete the destination

Continuation of the route guidance from the selected target (previous

waypoints are skipped)
Display the destination details

Insert destination into the route
In the area , tap on the function surface Enter destination and enter a new
▶ A
destination.
▶ Or: tap on the area the functional surface destinations and select an object
A
in the list of stored destinations.
Each additional destination is added to the list as the first subsequent destina-
tion route.
» page 190
Change positions of destinations with each other
The relevant function surface  and move the destination to the desired po-
▶
sition.
With destinations on the route already reached, the note Destination reached is
displayed below the destination name. It is not possible to change the position
of these destinations with each other.
Store route
▶ In the area , tap the functional surface Save.
A
Save the edited route as a new route or replace the existing saved route.
▶
The route is saved in the route list» page
Stop route guidance
In the area , tap the functional surface Stop.
▶ A
Route change in the map
Only valid for Infotainment Columbus.
Fig. 242 Route change in the map / route transit point
A route in which there are no intermediate targets can be changed during
route guidance by inserting a transit point.
Add a transit point
›
In the Navigation main menu, tap on the function surface  → Change route in
map.
›
Touch the screen in the route field and move the cross-point to the desired
location on the map, e.g. , move
A
The transit point is added to the route
B
›
Tap on the function surface  .
194.
» Fig. 242).
» Fig. 242.
Navigation

193