Changing light bulbs for fog lights
Fig. 359 Remove the number plate light / replace the bulb
Read and observe
and
Remove the protective grille and headlight
›
Insert your finger in the hole
A
of arrow
» Fig.
359.
1
›
Unscrew the screws
using the screwdriver from the tool kit.
B
›
Remove the headlight in the direction of arrow
Replacing the light bulb
›
Press the latch on the connector in the direction of arrow
›
Remove the key in the direction of the arrow
›
Turn the holder with the bulb to the stop in the direction of arrow
›
Remove the holder with the bulb in the direction of arrow
›
Insert a new holder with the bulb in the headlamp and turn it in the direction
of arrow
as far as the stop.
5
›
Attach the connector.
on page 295 first.
and remove the grille by pulling in direction
.
2
.
3
.
4
.
6
Refit the headlight and grille
›
Replace the fog light by inserting it in the opposite direction of the arrow
» Fig. 359
and tighten.
›
Insert the guard and push it gently until it locks into place.
Removing/installing tail light
Fig. 360 Removing light / pulling out connector
Read and observe
Removing
›
Open the boot lid.
›
Insert the clamps for removing the full wheel trims into opening
» Fig.
360.
A
›
.
Remove the cover by pulling the hook in the direction of arrow
5
›
Unscrew the screws
›
Hold the light and carefully remove in the direction of arrow
›
Press the latches on the connector in the direction of arrow
›
Carefully remove the connector from the lamp assembly in the direction of
the arrow
.
4
and
on page 295 first.
using the screwdriver from the tool kit.
B
Fuses and light bulbs
2
.
1
.
2
.
3
297