Personalization - Skoda SUPERB Owner's Manual

Displaying the distance and days until the next service interval
›
Switch on the ignition.
›
Press and hold the button » Fig. 42
A
the display.
›
Release the button .
A
In the display, the symbol  appears for 4 seconds along with the following
message for the kilometres or days to the next service appointment.
The details regarding the remaining kilometres or days until the next scheduled
service can also be displayed in Infotainment in the menu
Service messages
Before the next service date has been reached, the symbol  as well as a
message about the mileage or days until the next service event appears in the
display after the ignition is switched on.
Once the service interval is reached, the symbol  appears in the display after
the ignition is switched on, together with the message:
Resetting the service interval display
Have the display reset by a specialist garage.
We recommend that you do not reset the service interval display yourself. In-
correctly setting the service interval display can cause problems to the vehicle.
Variable service interval
For vehicles with variable service intervals, after resetting the oil change serv-
ice display in a specialist garage, the values of the new service interval are dis-
played, which are based on the previous operating conditions of the vehicle.
Fig. 42
Button in the instrument cluster
until theService menu item is shown in
/  →  → Service.

These values are then continuously matched according to the actual operating
conditions of the vehicle.

Personalization


Introduction
Thanks to the personalisation, more drivers have the opportunity to use a vehi-
cle with individually set system functions by means of a user account which is
assigned to the respective vehicle key.
WARNING
Make all adjustments when the vehicle is stationary - otherwise there is the
risk of accident!
Operating principle
Fig. 43
Switching to a different user account

Read and observe on page 53 first.
After unlocking the vehicle and opening the driver's door, all the personalised
functions are adjusted according to the user account that is assigned to the
key which was used to unlock the vehicle.
Any change to the set personalised functions is automatically stored in the ac-
tive user account.
As part of the personalisation, three default user accounts as well as a
Guestaccount are provided.
Switch to a different user account
You can switch to a different user account in the instrument cluster display
» Fig. 43 within 10 seconds after turning on the ignition.

53
Information system