Headrests
Introduction
Note
In sports seats, the headrests are integrated into the seat backrests and can-
not be adjusted in height.
Adjust height of front head restraint
›
To adjust the height, hold the locking button
sired direction
» Fig.
90.
CAUTION
If the tablet holder adapter is secured to the guide rods of the headrests
» page
100, do not push the headrests down to the stop – risk of damaging the
headrests.
Fig. 90
Setting the height of the front
headrest
and move the rest in the de-
A
Adjusting the height of the rear headrests
Fig. 91 Setting the height of the rear headrest
›
Grasp the headrest and move upwards in the direction of
›
To move the restraint down, hold the locking button
arrow
and push the rest in the direction of arrow
2
Removing/inserting the rear headrests
Fig. 92 Removing/inserting the rear headrest
›
To remove, pull the rest out of the seat backrest up to the stop.
›
Hold the locking button
in the direction of arrow
A
ing a flat screwdriver with a max. width of 5 mm to press the locking button
in the opening
in the direction of arrow
B
rection of arrow
» Fig.
92.
3
›
To insert, push the rest into the seat backrest in the direction of arrow
until the locking button clicks into place.
» Fig.
91.
1
in the direction of
A
.
3
, at the same time us-
1
and pull out the rest in the di-
2
4
85
Seats and head restraints