Obtain Nw User Property - Kyocera ECOSYS M4125idn Operation Manual

User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
2
Configure the settings.
Change or add information as needed.
Item
User Name
Access Level
Account Name
Authorization Rules
*1 Displayed only when the optional fax function is installed.
3
Registering the group.
Select [Save].

Obtain NW User Property

Set the required information to obtain the network user property from the LDAP server. The user name and E-mail
address obtained with this setting is shown in the user information, the status confirmation screen, and the header of E-
mail.
NOTE
To obtain the network user property from the LDAP server, [Network Authentication] must be selected for the
authentication method in "User Login Settings". Select "On" for "LDAP" in "Protocol Settings".
Enabling User Login Administration (9-4)
LDAP (8-41)
Enter the name displayed on the user list (up to 32 characters).
The default setting is "Guest User".
The authority of the user appears. This cannot be changed.
Add an account where the user belongs.
If the user does not belong to any account, select [
Set usage authority for each user.The items you can restrict the access level with are as follows.
Print Restriction:
Select whether or not use of the print function of the printer is prohibited.
Copy Restriction:
Select whether or not use of the copy print function is prohibited.
Duplex Restriction:
Select whether only duplex printing is allowed.
Combine Restrict:
Specify whether only Combine is allowed.
EcoPrint Restriction:
Specify whether only EcoPrint is allowed.
Send Restriction:
Select whether or not use of the send function is prohibited.
*1
FAX TX Restriction :
Select whether or not use of the fax send function is prohibited.
Storing Restr. in Box:
Select whether or not use of the box store function is prohibited.
Storing Restr. in Memory:
Select whether or not use of the removable memory store function is prohibited.
Descriptions
Other Account
9-20
].