Enabling Job Accounting; Job Accounting Access - Kyocera ECOSYS M4125idn Operation Manual

User Authentication and Accounting (User Login, Job Accounting) > Enabling Job Accounting

Enabling Job Accounting

1
Display the screen.
1
[System Menu / Counter] key > [User Login/Job Accounting
NOTE
If the user authentication screen appears, enter your login user name and login password and select [Login].
For this, you need to log in with administrator privileges. The factory default login user name and login password
are set as shown below.
Login User Name
ECOSYS M4125idn:2500, ECOSYS M4132idn:3200
Login Password
ECOSYS M4125idn:2500, ECOSYS M4132idn:3200
2
[Job Accounting Settings] > [Job Accounting Settings]
2
Select [On].
NOTE
• To disable job accounting, select [Off].
• When the display returns to System Menu default screen, logout is automatically executed and the screen to
enter the Account ID appears. To continue the operation, enter the Account ID.

Job Accounting Access

1
Display the screen.
1
[System Menu / Counter] key > [User Login/Job Accounting]
NOTE
If the user authentication screen appears, enter your login user name and login password and select [Login].
For this, you need to log in with administrator privileges. The factory default login user name and login password
are set as shown below.
Login User Name
ECOSYS M4125idn:2500, ECOSYS M4132idn:3200
Login Password
ECOSYS M4125idn:2500, ECOSYS M4132idn:3200
2
[Job Accounting Settings] > [Job Accounting Access]
2
Configure the settings.
Select [Local] or [Network].
NOTE
To select [Network], network authentication must be enabled and [Ext.] must be selected for server type.
Enabling User Login Administration (9-4)
9-28