Kyocera ECOSYS M4125idn Operation Manual page 167

Preparation before Use > Adding a Destination
NOTE
• For details on entering characters, refer to the the following:
Character Entry Method (12-11)
• Search and send are not supported when two-byte characters are used in the host name, domain name,
workgroup name, or user name.
• To check the connection to the specified computer, select [Menu] > [Connection Test]. If the connection fails,
check the entries you made.
The Folder (FTP) Address
[SMB] > [Host Name], [Path], [Port], [Login User Name] or [Login Password] > [OK]
The table below explains the items to be entered.
Item
Host Name
*1
Path
Path
Login User Name
Login Password
*1 When the FTP server is based on Linux/UNIX, the path including the sub-folder is combined by the slash (/) and not the
\
back-slash( ).
NOTE
• For details on entering characters, refer to the the following:
Character Entry Method (12-11)
• To check the connection to the specified FTP server, select [Menu] > [Connection Test]. If the connection fails,
check the entries you made.
1
If you want to specify an address number, select [Address Number].
2
Use [+] / [-] or the numeric keys to enter an address number (001 to 250).
To have the number assigned automatically, specify 000.
NOTE
• An address number is ID number for a single destination. You can select any available number for groups.
• If you specify an address number that is already in use, an error message will appear and the address will not
be added.
3
Select [OK].
4
Check if the destination entry is correct > [Save]
The destination is added to the Address Book.
Description
Host name or IP address of FTP server
Path for the file to be stored
\ \
For example: Use ScanData
If no path is entered, the file is stored in the home directory.
Port number (Normally 21)
FTP server login user name
FTP server login password
3-36
Max. No. of
Characters
64 characters
128 characters
-
1 65535
64 characters
64 characters