Security Settings - Kyocera ECOSYS M4125idn Operation Manual

System Menu > [System/Network]
Item
eSCL over SSL
Protocol Settings
Available Network
(Wi-Fi Direct)
Available Network
(Wi-Fi)
Available Network
(Wired Network)
*1 The setting will be changed after restarting the device or network.
*2 Use Security Settings to select [On] for [SSL].

[Security Settings]

Menu Transition: [System Menu/Counter] key > [System/Network] > [Network] > [Security Settings]
Item
SSL
IPP Security
HTTP Security
SMTP Security
POP3 Security
(User 1)
POP3 Security
(User 2)
POP3 Security
(User 3)
[Ping]
Menu Transition: [System Menu/Counter] key > [System/Network] > [Network] > [Ping]
Item
Ping
Selects whether to receive scanned documents using eSCL over SSL.
Value: Off, On
Set whether to use our proprietary web services over SSL.
Value: Off, On
NOTE
When selecting [On], it also requires a certificate for SSL. The default certificate is
the self-certificate of the machine.
Select whether or not each network is enabled.
Value: Disable, Enable
NOTE
This setting is displayed when the [Protocol Settings] setting is [On].
Select whether to use SSL for communication.
Value: Off, On
Select the IPP security level. This setup is available when SSL is [On].
Value: IPP/IPP over SSL, IPPoverSSL only
Select the HTTP security level. This setup is available when SSL is [On].
Value: HTTP/HTTPS, HTTPS Only
Select the communication protocol in accordance with the types of security supported
by the SMTP server. This setting is available when the [SMTP] setting is [On].
Value: Off, SSL/TLS, STARTTLS
Select the communication protocol in accordance with the types of security supported
by the POP3 server. This setting is available when [POP3] is [On].
Value: Off, SSL/TLS, STARTTLS
Checks if communication with the destination by entering the host name or IP address
of the destination is possible.
NOTE
If [Network Interface (Send)] is set to [Optional NIC], this item is not displayed.
8-46
Description
*1*2
Description
Description
*1*2