Executing Favorites In Wizard Mode - Kyocera ECOSYS M4125idn Operation Manual

Preparation before Use > Recalling Frequently Used Functions (Favorites)
5
Check the content. Change or add information as needed.
Item
Name
Add - Job Type
*1
Number
2
Owner*
2
Permission*
Function Format
*1 If user login administration is enabled, you can only change settings by logging in with administrator privileges.
*2 Displayed when user login administration is enabled.
6
Select [Register].
This adds the favorite.
7
"Do you want to add a new function to the home screen?" screen appears. To display a favorite to the Home
screen, select [Yes], specify the location where you want to display the icon of the favorite, and then select
[Save].

Executing Favorites in Wizard Mode

The procedure for recalling and executing a favorite in Wizard Mode is shown below.
1
Recalling the favorite.
1
On the Home screen, select [Favorites] or select the key of a favorite.
If you selected the key of a favorite, that favorite will be recalled. If you selected [Favorites], proceed with the following
steps.
2
Select the key of the favorite you want to recall.
2
This executes the favorite.
1
A series of screens will appear, so configure settings and then select [Next >].
The Transmit Settings dialog box will appear.
NOTE
To change a setting, select [< Back] and then make the changes you want.
2
Place the originals > [Start] key
Enter up to 32 characters for the name that appears on the Favorites screen.
Shows the type of the selected job.
Enter a number for the favorite.
If you specify "00" as the address number, the address is added under the lowest available
number.
Shows the user.
Specifies whether favorites should be shared with other users.
Selects the method used to recall favorites.
Description
3-46