Kyocera ECOSYS M4125idn Operation Manual page 353

Hide thumbs Also See for ECOSYS M4125idn:
Table of Contents

Advertisement

System Menu > [System/Network]
[TCP/IP Settings]
Item
TCP/IP
IPv4 Settings
DHCP
Auto-IP
IP Address
Subnet Mask
Default Gateway
IMPORTANT
• When setting the Auto-IP, enter "0.0.0.0" in [IP Address].
• After changing the setting, restart the network or turn the machine OFF and then ON.
[Restart Network] (8-47)
Item
IPv6
Select whether to use TCP/IP Protocol.
Value: Off, On
Set up TCP/IP (IPv4) to connect to the network. This setting is available when [TCP/IP] is
[On].
Select whether to use the DHCP (IPv4) server.
Value: Off, On
Select whether to use Auto-IP.
Value: Off, On
Set the IP address.
Value: ###.###.###.###
NOTE
When DHCP is set to [On], this function will be grayed out and the value cannot be
entered.
Set the IP subnet mask.
Value: ###.###.###.###
NOTE
When DHCP is set to [On], this function will be grayed out and the value cannot be
entered.
Set the IP gateway address.
Value: ###.###.###.###
NOTE
When DHCP is set to [On], this function will be grayed out and the value cannot be
entered.
Set up TCP/IP (IPv6) to connect to the network. This setting is available when [TCP/IP] is
[On].
8-35
Description
Description

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ecosys m4132idn

Table of Contents