Kyocera ECOSYS M4125idn Operation Manual page 107

Hide thumbs Also See for ECOSYS M4125idn:

Table of Contents

Installing and Setting up the Machine > Installing Software

Select [Custom Install].

Install the software.

Select the device to be installed.

If Wi-Fi or Wi-Fi Direct is enabled, be sure to specify the IP address for the port name. Installation may fail if the

host name is specified.

• The machine cannot be detected unless it is on. If the computer fails to detect the machine, verify that it is

connected to the computer via a network cable and that it is turned on and click (Refresh).

• If the desired device does not appear, select [Add custom device] to display the list, and select the desired

Select the driver to be installed.

Click (Update).

Ecosys m4132idn