Obtain Nw User Property - Kyocera ECOSYS PA6000 Series Operation Manual

User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration

Obtain NW User Property

Set the required information to obtain the network user property from the LDAP server.
NOTE
• This setting only appears when the "Login Type" of "User Login" is set to [Netwk Authentic.] and the "Server
Type" is set to [NTLM] or [Kerberos].
Enabling User Login Administration (page 9-3)
• Select [On] for [LDAP] in [Protocol Settings].
ProtocolSettings (page 8-20)
1
Display the screen.
1 [Menu] key > [ ] [ ] key > [User/Job Account] > [OK] key
NOTE
If the User Authentication screen appears, log in with a user who has the privilege to configure this
setting. If you do not know your login User Name or Password, please contact your Administrator.
2 [ ] [ ] key > [User Login Set.] > [OK] key > [ ] [ ] key > [NW User Property] > [OK] key
2
Configure the settings.
The setting items are as follows.
Item
Off/On
Authenticat Type
*1 Appears when the server type is set to "Kerberos" in "Netwk Auth. Set.".
3
Select [OK] key.
Set whether or not network user information is acquired.
Value: Off, On
*1
Set the authentication method.
Value: Simple, SASL
Descriptions
9-13