Kyocera ECOSYS M4125idn Operation Manual page 366

System Menu > [System/Network]
[Basic]
Item
Host Name
TCP/IP Setting
NetWare
AppleTalk
LAN Interface
MAC Address Filter
Restart Network
*1 The setting will be changed after the device or network is restarted.
Check the host name of the machine. Host name can be changed from Command
Center RX.
Changing Device Information (2-44)
For details on setting value.
[TCP/IP Setting] (8-37)
[IPSec] (8-39)
Use NetWare to receive documents.
Network Interface Kit Operation Guide
Value: Off, On
Selects whether to receive documents using AppleTalk.
Value: Off, On
*1
Select the LAN interface.
Value: Auto, 10Base-Half, 10Base-Full, 100Base-Half, 100Base-Full, 1000BASE-T
NOTE
This function is displayed when the optional Network Interface Kit (IB-50) is
installed.
Select whether to use MAC Address Filter.
Network Interface Kit Operation Guide
Value: Off, On
Restarts the network card of the device.
8-48
Description
*1