Modifiable Parameters; Adjusting Detergent And Rinse Aid Dispensing (Only Available On Certain Models); Rinse Aid - Grams/Liter Dosage (Depends On Model)- The Display Reads "Ri; Detergent - Grams/Liter Dosage (Depends On Model) - The Display Reads "De - Smeg UD505DSUK User Manual

6.4 Modifiable parameters

This table lists the model choice or programme and temperature option parameters.
Display Settings available
°b From 85° to 71°
°t From 62° to 52°
0 – 2 gr/lt (in steps of 0,1)
ri
0-10 gr/lt
dE
(0-3 in steps of 0,2; 3-10 in steps of 1,0)
St On - OF
HA H0 – H6
Er On-OF
CL On-OF
TS On - OF
Fi FS-EC
Sr -

6.5 Adjusting detergent and rinse aid dispensing (only available on certain models)

6.5.1 Rinse aid – Grams/liter dosage (depends on model)- The display reads "
6.5.2 Detergent - Grams/liter dosage (depends on model) - The display reads "
Factory-set default value = 2 gr/lt.
Boiler temperature
Tank temperature
Rinse aid batching
Detergent batching
Auto-start:
washing programme starts when door is closed On enabled OF disabled
Water hardness setting ( see table 6.8 in the following pages)
Prolonged rinse at the end of the washing cycle (+8").
Clean water cycle. On enabled OF disabled
Thermostop On enabled OF disabled
Starting the machine in FAST or ECO mode
(models without rinsing pump only)
Access Service menu (for Authorised Engineer only)
Every time is pressed, the
value increases of 0,1 g/l up to a
max. of 2 g/l.
Default: 1,2 g/l.
From 0,0 g/l to 3,0 g/l every time
is pressed, the value increases
of 0,2 g/l.
11
Description
ri
"
"
dE
Beyond 3,0 g/l every time
pressed, the value increases 1,0 g/l
up to 10,0 g/l (maximum value).
is