Smeg UG405DUK Manual
  1. Manuals
  2. Brands
  3. Smeg Manuals
  4. Dishwasher
  5. UG405DUK
  6. Manual

Smeg UG405DUK Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Summary
1
PRODUCT IDENTIFICATION................................................................................................................................. 3
1.1
Application, general functions and intended use ........................................................................................ 3
1.2
Name and address of manufacturer or distributor ...................................................................................... 3
Smeg S.p.A............................................................................................................................................................. 3
1.3
Declaration of conformity to product standards ......................................................................................... 3
1.4
Description of the appliance ....................................................................................................................... 4
2.
SYMBOLS USED IN THE MANUAL........................................................................................................................ 4
3.
SAFETY PRECAUTIONS AND INSTRUCTIONS ........................................................................................................ 5
3.1 Correct installation .......................................................................................................................................... 5
3.2 Safe use ........................................................................................................................................................... 6
3.3 Correct maintenance ....................................................................................................................................... 6
4.
PRODUCT CHARACTERISTICS .............................................................................................................................. 7
4.1 Overall dimensions for built-under installation ................................................................................................. 7
4.2 Technical characteristics .................................................................................................................................. 8
5.
PREPARING THE APPLIANCE FOR USE ................................................................................................................. 9
5.1 Positioning and installation .............................................................................................................................. 9
5.2 Connection to the water supply ..................................................................................................................... 10
5.3 Drain connection............................................................................................................................................ 10
5.4 Connection to the electricity supply ............................................................................................................... 11
6.
FIRST START-UP ............................................................................................................................................... 11
6.1
Using the water softener (on models with this feature only) .................................................................... 12
7.
SET-UP (Authorised technical staff only) .......................................................................................................... 13
7.1
Contents of display ................................................................................................................................... 14
7.2
Note on display of temperatures .............................................................................................................. 14
7.3
Parameter programming procedure (setup) ............................................................................................. 14
7.4
Modifiable parameters ............................................................................................................................. 15
7.5
7.6
7.7
Adjusting the regeneration frequency (models with softener only) .......................................................... 16
7.8
Mains water hardness setting table .......................................................................................................... 16
7.9
7.10
1

Advertisement

Table of Contents
loading

Related Manuals for Smeg UG405DUK

Summary of Contents for Smeg UG405DUK

  • Page 1: Table Of Contents

    PRODUCT IDENTIFICATION..........................3 Application, general functions and intended use ..................3 Name and address of manufacturer or distributor ..................3 Smeg S.p.A................................3 Declaration of conformity to product standards ..................3 Description of the appliance ........................4 SYMBOLS USED IN THE MANUAL........................4 SAFETY PRECAUTIONS AND INSTRUCTIONS ......................
  • Page 2 MALFUNCTIONS SHOWN ON THE DISPLAY (FOR THE USER) ................. 29 SMEG thanks you for choosing one of its products. This manual is an integral part of the appliance. Take good care of it and keep it to hand throughout the appliance’s life cycle, since it contains important information about assembly, safety, use and maintenance.

  • Page 3: Product Identification

    Electronic Equipment (WEEE). For information on the treatment, recovery and recycling of this product, contact the local authority, domestic waste collection service, or your Smeg reseller. Make sure that this product is scrapped correctly to safeguard the environment and health.

  • Page 4: Description Of The Appliance

    1.4 Description of the appliance COVER (TOP) DISPLAY AND CONTROL PANEL FRONT LOADING/UNLOADING DOOR SERVICE COMPARTMENT ADJUSTABLE FEET 2. SYMBOLS USED IN THE MANUAL This symbol instructs the user to read the instructions in the manual with care. This symbol appears next to information important for the safety of people and the appliance.

  • Page 5: Safety Precautions And Instructions

    3. SAFETY PRECAUTIONS AND INSTRUCTIONS The precautions and instructions below contain important information and must be read with care. The manufacturer does not accept responsibility for damage caused by failure to comply with the safety precautions and instructions. 3.1 Correct installation ...

  • Page 6: Safe Use

    3.2 Safe use  The staff assigned to use the dishwasher must be suitably trained and instructed.  The appliance is not suitable for use by juveniles or persons with reduced physical, sensorial or mental capacities, or those without the necessary knowledge and experience. Such persons may only use the appliance under the supervision of a person responsible for their safety.

  • Page 7: Product Characteristics

    4. PRODUCT CHARACTERISTICS 4.1 Overall dimensions for built-under installation LOWER BACK PANEL FILLER HOSE EARTH TERMINAL ELECTRICITY SUPPLY CABLE PERISTALTIC HOSES DRAIN HOSE EXTERNAL DISPENSER POWER CABLE ENTRY POINT...

  • Page 8: Technical Characteristics

    4.2 Technical characteristics Electricity supply See technical data plate and Intake water pressure electrical wiring diagram supplied with the appliance Intake water temperature Indoor Max. working altitude 2000 Working ambient temperature °C 10 - 35 Relative humidity 80% for temperatures up to 25°C with linear decrease to 50% at the temperature of 35°C...

  • Page 9: Preparing The Appliance For Use

    5. PREPARING THE APPLIANCE FOR USE Convey the dishwasher to the installation site, remove the packaging and check the appliance and components for damage; any damage found must be reported to the transporter in writing. The packaging components (plastic bags, expanded polystyrene, nails, etc.) must not be left within reach of children and pets since they are potentially dangerous.

  • Page 10: Connection To The Water Supply

    5.2 Connection to the water supply Check that the intake water pressure, flow rate and temperature are as stated in the dishwasher's technical characteristics. If the dynamic pressure exceeds the limit stated in the technical characteristics, a pressure reducer must be installed. If the pressure is lower, it might be necessary to fit a special pump to ensure optimal performance.

  • Page 11: Connection To The Electricity Supply

    5.4 Connection to the electricity supply The dishwasher must be connected to the electrical system by authorised, skilled staff, in accordance with the relevant regulations. Also comply with the technical instructions for the connection provided with the appliance. The dishwasher's rated electrical characteristics are provided on its technical data plate. A circuit breaker with contact gap rated for category II overvoltage and an overcurrent protection device (magnetothermal switch or fuses) must be installed in an easily accessible position on the dishwasher's power supply line.

  • Page 12: Using The Water Softener (On Models With This Feature Only)

    IMPORTANT Whenever the type of detergent or rinse aid is changed, it is ABSOLUTELY ESSENTIAL to flush out the peristaltic pumps by placing the external intake pipes in water for a few cycles. Always use only products specifically recommended for use in a professional dishwasher.

  • Page 13: Set-Up (Authorised Technical Staff Only)

    7. SET-UP (Authorised technical staff only) Set-up During first start-up, the functions/parameters listed below must be set or adjusted. Control Panel Key to Symbols On/off button Total pump-out (tank -boiler) button Regenerating salt symbol (only if softener is fitted) Short programme button Medium programme button Long programme button L1 ...

  • Page 14: Contents Of Display

    Using the buttons Long press, release, press Button Short press Pressed for 2” Pressed for 5” again Door open and machine OFF. Long press >>> display reads Display temperatures On/OF “- -“ >>> release and press Boiler and tank again: Access Setup Menu (1) Scroll through Setup Start Pump-out Total pump-out (tank+boiler)

  • Page 15: Modifiable Parameters

    7.4 Modifiable parameters This table lists the model choice or programme and temperature option parameters. Display Settings available Description °b From 85° to 71° Boiler temperature °t From 62° to 52° Tank temperature 0 – 2 gr/lt (in steps of 0,1) Rinse aid batching 0-10 gr/lt Detergent batching...

  • Page 16: Starting The Peristaltic Pumps In Manual Mode - Rapid Filling Of Detergent And Rinse Aid Circuit

    7.6 Starting the peristaltic pumps in manual mode – rapid filling of detergent and rinse aid circuit Energized dishwasher and full tank: press for 5 seconds buttons P2 simultaneously. The peristaltic pumps work until P1 or P2 are pressed again; during the procedure the indicator lights stay on and the display shows “rd”.

  • Page 17: Clean Water Cycle" Option - Display Reads "Cl

    7.10 "Clean water cycle" option - Display reads “CL” When this option is activated, the appliance pumps out all the water from the tank and then refills it with clean water at every wash cycle. How long this operation takes depends on the washing water temperature.

  • Page 18: Malfunctions Shown On The Display (For The Technician)

    8. MALFUNCTIONS SHOWN ON THE DISPLAY (FOR THE TECHNICIAN) The dishwasher is able to identify a number of malfunctions and show them on the display. If the problem persists after the dishwasher has been switched off and back on, proceed as described below: Tank temperature probe Tank temperature probe disconnected or not working.

  • Page 19: Instructions For The User

    9. INSTRUCTIONS FOR THE USER 9.1 Control panel Key to Symbols On/off button Total pump-out (tank -boiler) button Regenerating salt symbol (only if softener is fitted) Short programme button Medium programme button Long programme button L1  Short programme Led L2 ...

  • Page 20: Before Washing

    Use only detergents and rinse aids for industrial dishwashers. Do not use detergents intended for hand washing. We recommend the use of Smeg products, specially developed for this dishwasher. When topping up the tanks, take care not to swap the products; this might damage the dishwasher and cause malfunctions.

  • Page 21: First Use Each Day (Tank And Boiler Empty)

    4. That the filters are in place, the spray arms rotate, and there are no foreign bodies in the dishwasher. 5. Switch on the master switch (user): the decimal points of both digits appear on the display. 9.3 First use each day (tank and boiler empty) Door closed and master switch on ON: Press and hold for 2/3 seconds, Leds ON/OF light up and...

  • Page 22: Choosing The Program

    9.4 Choosing the program SYMBOL PROGRAM TYPE OF DIRT DURATION (*) Short Glasses and cups 1 min 30 s 2 min 30 s Medium Glasses, cups and plates with light dirt Long Very dirty dishes and cutlery 4 min (*) The cycle duration stated above is guaranteed if the water intake temperature is as stated and recommended in the "TECHNICAL DATA"...
  • Page 23 BASKETS PROVIDED The shape and material of the baskets provided with the dishwasher depend on the purchased model. Extra baskets can be purchased through the After-Sale Service. The following images are indicative. Glasses: Place the glasses downwards. Cutlery Use the dedicated basket. Place the cutlery randomly, preferably with the handle downwards, using caution to avoid injures...

  • Page 24: Maintenance And Cleaning

    (risk of corrosion/rust). 10 MAINTENANCE AND CLEANING We recommend regular servicing by a SMEG authorised service centre at least once a year, to guarantee optimal performance at all times. Consumables (e.g. peristaltic pump hoses) and/or parts subject to wear and tear must be replaced with genuine SMEG parts.

  • Page 25: Daily Cleaning Of Filters

    10.1 Daily cleaning of filters The filter group is made of 2 or 3 filtering elements, according to the model. Procedure to disassemble filters made of 3 filtering elements: a- Unfasten and remove the lower spray arm b- Lift and remove the two rectangular filters c- Rotate filter “C”, lift it and separate it extracting the central part “D”...

  • Page 26: Routine Inspection Of The Spray Arms (Once A Week)

    Procedure to disassemble the filters made of 2 filtering elements: it is not necessary to remove the lower spray arm. a- Rotate filter “C”, lift it and separate it by extracting the central part “D” Filter “C” can have different depths, according to the model. When removing the filters, do not let the coarse residues fall into the basin under the filters;...

  • Page 27: Lengthy Periods Out Of Use

    10.3 Lengthy periods out of use If the dishwasher is to be out of use for a fairly long period of time, the detergent and rinse aid dispenser devices must be emptied to prevent crystallisation and damage to the pumps: Remove the intake hoses from the detergent and rinse aid containers and place them in a container of clean water, then perform a few wash cycles followed by a complete pump-out.
  • Page 28 Badly positioned dishes / glasses. Place dishes / glasses correctly. Verify the temperature displayed, Low washing temperature if it is inferior than 50°C contact customer Support. Increase the duration of the washing Improper set cycle cycle, especially if the load is very dirty or partially dried.

  • Page 29: Malfunctions Shown On The Display (For The User)

    12 MALFUNCTIONS SHOWN ON THE DISPLAY (FOR THE USER) The dishwasher can show a series of malfunctions on display. After the machine has been switched off and restarted, if the problem is not solved, follow the steps below: ( FOR A MORE PROFICIENT AFTER-SALES SERVICE, ALWAYS TAKE NOTE OF THE INDICATED ERROR ) Err04 Tank temperature probe anomaly Contact After-sales Service...
  • Page 30 INFORMATION AND AFTER-SALES SERVICE FOR SMEG PRODUCTS COMMERCIAL DISHWASHERS Our Sales Department staff will be able to provide you with information about prices and special offers. Our After-Sales Department will be able to provide you with guidance about keeping your appliance functioning correctly and put you in touch with your nearest authorised Service Centre.

Table of Contents