Table of Contents
Advertisement
7.2 Modifiable parameters
The illustrations are purely guideline. The minimum and maximum temperatures available
depend on the model (glass washer, dishwasher, undercounter or hood-type model, ..).
Rinsing temperature
(boiler temperature)
Warning:
The tank and boiler temperatures shown on the display may be different from the actual
temperatures by a few degrees, especially in transient phases (just after the FILL is completed, just
after the end of the cycle, etc.) due to the inertia of the measurement probe.
Adjusting rinse aid dispensing (optional if installed)
Adjusting detergent dispensing (optional if installed)
From 0,0 g/l to 3,0 g/l every time
Beyond 3,0 g/l every time
Factory-set default value = 2 gr/lt.
is pressed, the value increases of 0,2 g/l.
is pressed, the value increases 1,0 g/l up to 10,0 g/l (maximum value).
Washing temperature
(tank temperature)
15
Every time
is pressed, the
value increases of 0,1 g/l up
to a max. of 2 g/l.
Default: 1,2 g/l.
Advertisement
Table of Contents
