Table of Contents
Advertisement
6.10
"Clean water cycle" option - Display reads "CL"
6.11
"Thermostop" option - Display reads "tS"
6.12
Fast/eco starting option - Display reads "Fi"
With this option clean water is used for every washing. At each cycle,
the washing water is completely drained and it is replaced with clean
water from rinsing.
Press
"on" = the minimum temperature of rinse as set, independently from
the intake water temperature, the nominal duration of cycle may be
extended by a few seconds.
"off" = the minimum temperature of rinse may be a few degrees lower
than the set one, if hot intake water is not used.
Press
Fast (FS): it allows to start the machine in less time than the standard;
it involves a greater water consumption at the first start.
Eco starting (EC): the machine starts in standard time, without any
additional water consumption.
Press
13
to enable (On)/disable (OF)
to enable (On)/disable (OF)
to enable (On)/disable (OF)
Hide quick links:
Advertisement
Table of Contents
