Table of Contents
Advertisement
If the door is opened when a program is in progress, the program is interrupted; when the door is closed
again the program must be restarted.
Power failure.
If the door is open when power is restored, the display reads "CLOSE" and "°t" flashes; the heating element
stays off for the user's safety, in order to avoid the risk of burns.
Close the door to resume heating the water in the tank.
8.5 Changing the program
If a programme is already running, it can be changed by first switching the appliance to pause status (by pressing one of the
buttons for 2") and then selecting the programme required.
If the master switch is not turned off, the appliance sets on the
last programme performed. To change the program, press the
button of the desired program, the led flashes and the display
reads the program duration.
To confirm hold down for about 2". The led flashes and the wash
program starts.
18
Hide quick links:
Advertisement
Table of Contents
