7.2 Modifiable parameters
The illustrations are purely guideline. The minimum and maximum temperatures
available depend on the model (glass washer, dishwasher, undercounter or hood-
type model, ..).
Rinsing temperature
(boiler temperature)
Warning:
The tank and boiler temperatures shown on the display may be different from the
actual temperatures by a few degrees, especially in transient phases (just after the FILL is
completed, just after the end of the cycle, etc.) due to the inertia of the measurement probe.
Adjusting rinse aid dispensing (optional if installed)
NOTE: Do not exceed the amount indicated by the manufacturer, as shown on the package.
An excessive amount may cause foaming.
Adjusting detergent dispensing (optional if installed)
NOTE: Do not exceed the amount indicated by the manufacturer, as shown on the package.
An excessive amount may cause foaming.
Autostart function
Washing temperature
(tank temperature)
Set at "on" to start the cycle when the hood/door is
Set at "off" to start the cycle after confirmation with
the start button
20
Every time
the value increases of 0,1
g/l up to a max. of 2 g/l.
Default: 1,2 g/l.
Every time
the value increases of 0,2
g/l up to a max. of 20 g/l.
Default: 2,6 g/l.
closed.
.
is pressed,
is pressed,