Address Test - HP Series 37 Reference Manual

Test Descriptions
3.3 TEST SECTION 3
Address Test
Step 31. Address Test -- This step will write the "exclusive or" of the bank and address of every available
location into itself. Each location is then read and verified. This procedure is repeated, using
the compliment of the "exclusive or" of the bank and address of every location as data. If this
test fails, the unique address capability may have failed.
The following messages will appear during test execution:
Begin Section 3
Begin Step 31
All of tested memory has been written
Pass 1 completed - Begin Pass
2
All of tested memory has been written
Step 31 completed
End of Section 3
Error message:
Expected: %XXXXXX; Received: %YYYYYY
Address
=
r.ZZZZZZ
Bank = W
Board
=
A
Where: XXXXXX = data expected in octal
YYYYYY
=
data received in octal
ZZZZZZ
=
address of error in octal 0 <
=
Z < " 1 77 7 77
W
=
bank with error 0 <
=
W <
=
31
A
=
0/1
SEP 84
3-5