Iomap - HP Series 37 Reference Manual

The foiiowing iilusirate ihe use of
HELP:
lomap
1-NORMAL
Test ->H
ROM Versions:1.nnnn 2.nnnn 3.nnnn 4.nnnn
Self test Menu:
AL(l] [ count]
CH[an} [ count [ ,chan ] ]
CP[u] [ count]
E[xit]
I[omap} [ count J
M[emoryJ [ count
PON [ count
1
1-NORMAL
Test
->
Command Descriptions
The
IOMAP
command executes a version of IOMAP which is contained in the Self Test ROM. This version
of IOMAP displays the number of banks of memory physically installed in the system and identifies all of
the I/O cards installed in the system. For PIC cards, all supported HPIB devices attached to the PIC are
identified and their ID code is displayed along with a device description.
This command runs the memory size portion of the memory test and .lisplays the size of memory, lists the
LOAD and START/DUMP devices, and then displays the types of cards installed in the system. The types
of devices on the PICs are also displayed.
The test may be looped by specifying the desired number of loops in count. Count must be an integer
between I and 9999 with I being the default. A space is required before specifing count.
The correct syntax for this command is:
I [omap) [
count}
NOV 84
3-\3