Command Descriptions
All
ALL runs all of the manually directed self tests except PON test in the following order:
• CPU test
• Memory Test
• Channel Test
.. IOMAP
The test may be looped by specifying the desired number of loops in
count. Count
must be an integer
between 1 and 9999 with 1 being the default. A space is required before specifing
count.
The correct syntax for this command is:
AL [ L
1 [
coun t
1
The following illustrates the use of the ALL command:
1-NORMAL
Test ->AL
TOC RAM
Addr Data
0008 0000
0009 0000
OOOA 0000
0008 0000
OOOC 0004
0000 OOOE
OOOE 0000
OOOF 0000
00serve LED display cycle O-F
CPU test passed
Memory Test passed-
Slot
1 Channel
1
- Terminal Interface Controller
Slot
4 Channel
4
- Peripheral Interface Channel
Test Passed
System I/O Configuration
Number of banks =
4
Load:
Channel
4 Device 3
Start/Dump: Channel
4 Device 1
Slot
1 Channel
Slot
4 Channel
4
Device 3 10=0260
1-NORMAL
Test ->
ID=4
- Terminal Interface Controller
10=2
- Peripheral Interface Channel
- 9144 Cartridge Tape Unit
NOV 84
3-9