Table of Contents
Advertisement
Example:
Example:
Example:
CPSEE_TSP500 User Guide
This document is confidential and proprietary to SER Solutions and is not for external use.
MONITOR_ASSIGN6
MONITOR_ASSIGN7
MONITOR_ASSIGN7
From the above examples it should be clear that:
•
Different monitors can be assigned to monitor the same agents. (Monitor
6 can monitor all of Monitor 4 and Monitor 5's agents)
•
Either ranges or single agents can be assigned.
•
Multiple configuration lines are allowed for the same Monitor. (See Mon-
itor 7)
Further notes:
•
Monitor Stations do not have to be excluded from the Agent Stations.
The TSP will ignore them. See example below – both are acceptable:
MONITOR_ASSIGN 4
MONITOR_ASSIGN 4
•
If a Monitor is specified with no agents, the Monitor will be unable to
monitor anyone.
MONITOR_ASSIGN4
From within the TSP application, the Admin Terminal "load" command,
using the "misc" or "all" argument, is used to activate any changes.
load misc or load all
For diagnostic purposes, the following changes were included in the TSP:
•
Entries in the TSP log files records the actual assignments. See the fol-
lowing example:
Assume the keyword MONITOR_ASSIGN
10:40:49.223
Assignments
10:40:49.223
assigned.
10:40:49.223
assigned.
10:40:49.223
assigned.
10:40:49.223
assigned.
10:40:49.223
assigned.
10:40:49.223
Version 4.0
Chapter 4 Features and Enhancements
1-48
49-57 77 97-104 109
120-128
1-24
1-3 5-24
Initializing Monitor Station
for monitor 169, station 2
for monitor 169, station 3
for monitor 169, station 4
for monitor 169, station 5
for monitor 169, station 6
for monitor 169, station 7
169
2-7
Page 4-21
Advertisement
Table of Contents
