Configuration; Example - Avaya CPSEE_TSP500 User Manual

Chapter 8 TSPLogger

Configuration

Example:

SYSLOG_HOST
SYSLOG_PORT
Page 8-4
This document is confidential and proprietary to SER Solutions and is not for external use.
The configuration file for controlling the TspLogger will be the file sys-
log.cnf (located in the /opt/ser/cfg directory). The following describes the
keywords used for configuring the TspLogger.
This file can be accessed via an item in the Configuration Menu on the TSP.
===============================================
TSP Configuration
(c) Copyright 2003-2004 SER Solutions Inc.
===============================================
A....DialingRules
B....DnisConfiguration
C....ISDNConfiguration
D....Strategies
E....SysLogConfiguration
F....Tools
G....Trunks
H....WriteCfigToArchive
Select Item:
The following describes the three configuration items used to configure the
TspLogger. SYSLOG_HOST is the only required assignment. The other two
are optional.
IP address of the PC where the syslogger resides. This should be entered
using dot notation.
Example:
SYSLOG_HOST 192.168.2.10
This keyword is optional. The default port used for TspLogger is the industry
standard port 514. If for some reason you need to use another port, this key-
word can be used to assign it.
Example:
SYSLOG_PORT 9400
Version 4.0
[tspdev10]
CPSEE_TSP500 User Guide