Table of Contents
Advertisement
Chapter 3 Starting/Configuring TSP500
Admin Terminal
Page 3-4
This document is confidential and proprietary to SER Solutions and is not for external use.
Once the TSP is running, you can access the Admin Terminal (dumb termi-
nal) by selecting the Admin_Terminal item in the menu. You can also
access the Admin Terminal using the Linux login dumb1.
The Admin_Terminal selection from the TSP menu system has options to
control the TSP. The following are some key pieces of information regarding
the Admin_Terminal:
1. Customer Support can use the Admin_Terminal command stoptsp to
shutdown the TSP application remotely. You can select Activate_TSP to
to restart the TSP.
2. The Admin_Terminal command quit is used to disconnect the
Admin_Terminal from the TSP. You must then press Enter twice to fin-
ish the disconnection process. You will return to the TSP Main Menu.
3. Immediately after starting the TSP application and entering into the
Admin_Terminal, you will see "Enter Command." After entering a com-
mand, it may take one to two minutes for the full application to start
before you receive a response from the terminal. This is normal.
4. See TSP500 Admin Terminal Commands in "Features and Enhance-
ments" on page 4-1 of this document.
Version 4.0
CPSEE_TSP500 User Guide
Advertisement
Table of Contents
