Table of Contents
Advertisement
The Main Menu
Figure 3-1. The Main Menu.
Quit
Note:
The state of the TSP is not
effected. If it was running, it
will still be running after you
"Quit" the User Interface
Activating the CPSEE_TSP500
CPSEE_TSP500 User Guide
This document is confidential and proprietary to SER Solutions and is not for external use.
The Main Menu has the following options:
•
Quit
•
Activate_TSP
•
Admin_Terminal
•
Configuration
•
Simulated_TSP
•
Unix_Shell
Selecting the Zero (0) key will exit the TSP application and close the Linux
Session.
To start the TSP, do the following:
1. Select Activate_TSP. If the TSP is already running, the message TSP
Already Running... displays. Otherwise, the TSP will be launched as a
background process, and the message TSP Started displays.
2. Press Enter to return to the TSP Main Menu.
If for some reason the TSP fails to start, the tsp.log file located in /usr/home/
cpstsp/cps01/log should be examined to determine the cause of the failure.
Version 4.0
Chapter 3 Starting/Configuring TSP500
Page 3-3
Advertisement
Table of Contents
