Table of Contents
Advertisement
Figure 3-21. View ISDN Configuration.
Reset ISDN Configuration
Figure 3-22. Reset ISDN Configuration.
Configuring the Syslog
CPSEE_TSP500 User Guide
This document is confidential and proprietary to SER Solutions and is not for external use.
Reset ISDN Configuration will reset the selected span(s) to default settings.
The configuration file for controlling the TspLogger will be the file sys-
log.cnf (probably located in the /opt/ser/cfg directory). The following
describes the keywords used for configuring the TspLogger.
There are three configuration items that you can use to configure the TspLog-
ger. SYSLOG_HOST is the only required assignment. The other two are
optional.
Table 3-3: TspLogger configuration elements.
Element
SYSLOG_HOST
Version 4.0
Chapter 3 Starting/Configuring TSP500
Description
IP address of the PC where the syslogger resides.
This should be entered using dot notation.
Example: SYSLOG_HOST 192.168.2.10
Page 3-13
Advertisement
Table of Contents
