Restarting Protocols
Examples:
CPSEE_TSP500 User Guide
This document is confidential and proprietary to SER Solutions and is not for external use.
Occasionally, it may be necessary to restart the telephony protocol on a spe-
cific trunk channel.
You can now start the protocol using the Admin Terminal "treset" command
with the –s option. If the channel is currently in use when the command is
issued, the reset will take place when the channel becomes idle.
treset –s
23
treset –s
11
treset –s
1-33
treset –s
all
Version 4.0
Chapter 4 Features and Enhancements
59
Page 4-3