Table of Contents
Advertisement
Chapter 5 Admin Terminal Commands
Testing Music On Hold
OPTIONS (opt)
Note:
Options settings are non-vol-
atile, meaning they will sur-
vive a reboot or power cycle.
Page 5-14
This document is confidential and proprietary to SER Solutions and is not for external use.
1. Disable trunk 1.
disable 1
2. Enable Music-On-Hold.
music on
3. Launch a test dial to yourself – when you answer, you should be hearing
Music-On-Hold.
dial 2035551212 1
For Example, assume that you want to raise the volume by setting the gain to
+2db, stop Music On Hold, and restart it with new decibel setting:
music off
music on 2
You should now hear the music with the +2db gain. To make the music less
loud (let's say -3db ), set the following:
music off
music on –3
The OPTIONS command allows dynamic setting of certain TSP options.
Typing options by itself will display a list of options that can be set and there
current values. The specific items are turned ON and OFF by typing options
followed a hexadecimal value that represents a bit pattern associated with the
items on the screen. The MSN (Most Significant Nibble) is toward the bottom
of the screen, and the LSN (Least Significant Nibble) is toward the top.
Figure 5-2. The OPTIONS command.
The following is a list of options that can be set:
Version 4.0
CPSEE_TSP500 User Guide
Advertisement
Table of Contents
