The Tsp Configuration Menu; Accessing The Dialing Rules - Avaya CPSEE_TSP500 User Manual

The TSP Configuration Menu

Accessing the Dialing Rules

See Also:
"Key Words of Dialing Rules"
on page 6-5 for a detail
description of the fields in this
file.
CPSEE_TSP500 User Guide
This document is confidential and proprietary to SER Solutions and is not for external use.
The TSP Configuration Menu has selections for each TSP500 configuration
file. Pressing Esc will bring you back to the Main menu.
Figure 3-2. The Configuration Menu.
Selecting Dialing Rules opens the dialing rules with the vi editor. The vi edi-
tor is a screen editor that operates in a command or data mode. You enter the
command mode by typing ":" and the command. For example, to quit the vi
session without saving changes, you would type :q. Table 3-1 identifies a list
of commands and their key value.
Table 3-1: Red Hat Linux VI Commands.
Command
vi <file-name>
h
j
k
l
i
r
R
a
A
w
Version 4.0
Chapter 3 Starting/Configuring TSP500
Description
Opens a file for editing
Moves cursor one location to the left
Moves cursor one line down
Moves cursor one line up
Moves cursor one location to the right
Enter insert mode at location of cursor
Replace character
Enter overwrite character mode
Enter append character mode
Enter append character mode at the end of the cur-
rent line
Write out current file
Page 3-5