Table of Contents
Advertisement
GuestWorks and DEFINITY ECS Release 9
Hospitality Operations 555-231-742
Hospitality Operations
Front Desk Operations
Activate Do Not Disturb for One Room
NOTE:
To add or change a Do Not Disturb request, do the following:
1. Press the
DO NOT DIST- Ext:
2. If you are already on an active call with the guest requiring Do Not Disturb,
the extension number displays automatically. Press the
the displayed number for Do Not Disturb.
If you are not connected to the room requiring Do Not Disturb, enter the
room number, and then the
ext
DO NOT DIST- Ext: <ext> Time: --:--
3. Enter the time when the Do Not Disturb period is to end (the cancellation
time) in the 4-digit hh:mm format (hour:minute).
DO NOT DIST- Ext: <ext> Time: <hh:mm>
DO NOT DIST - Ext: <ext> Time: <hh:mm> -M
4. Press the 2 button for A.M., or press the
Do Not Disturb cannot be activated using the PC console.
button.
dnd ext
The DND Ext lamp goes on.
The following displays:
button again, and start over.)
The following displays:
If a Do Not Disturb request already exists for the room, the
cancellation time field will be filled in.
If you entered a time between 13:00 and 00:59, the following
displays:
Go to
Step 5.
If you entered a time between 01:00 and 12:59, the following
displays:
The display now shows an AM or PM designator.
button. (If you make a mistake, press the
#
button for P.M.
7
Issue 1
November 2000
52
button to select
#
dnd
Advertisement
Table of Contents
