Table of Contents
Advertisement
GuestWorks and DEFINITY ECS Release 9
Hospitality Operations 555-231-742
Hospitality Operations
Front Desk Operations
Activate Controlled Restriction for a Group of Rooms
To activate a controlled restriction for a group of rooms, do the following:
!
CAUTION:
1. Press the
2. Enter the Group Controlled Restriction activation dial access code _____
followed by one of these four digits:
3. After hearing the second dial tone, enter the 2-digit COR number of the
group.
If you use this feature, be sure that you understand which rooms are
in a particular COR. Since this feature is controlled by the COR, all
telephones in the same COR will have the selected restriction applied.
This could lead to guest service problems if not applied correctly.
button or an idle call appearance button.
start
You hear dial tone.
The call appearance lamp goes on.
The Position Available lamp goes off.
Press the
button for Outward/Toll Restriction.
1
Press the
button for Total Restriction.
2
Press the
button for Termination Restriction.
3
Press the
button for Station-to-Station/Toll Restriction.
4
A confirmation tone indicates that the restriction was activated. An
intercept tone indicates that the group of rooms already has a
restriction assigned, or you entered an improper digit.
The call appearance lamp goes off.
The display goes blank.
The Position Available lamp goes on.
The console returns to the normal operating mode.
Issue 1
November 2000
47
Advertisement
Table of Contents
