Table of Contents
Advertisement
GuestWorks and DEFINITY ECS Release 9
Hospitality Operations 555-231-742
Hospitality Operations
Front Desk Operations
Dual Wakeup
To add or change a wakeup call when the Dual Wakeup feature is enabled, do the
following:
1. Press the
AUTO WAKEUP - Ext:
2. If you are already on an active call with the guest requiring the wakeup
call, the extension number displays automatically. Press the
select the displayed extension for wakeup.
If you are not connected to the room requiring wakeup, enter the room
number, followed by the
wakeup
AUTO WAKEUP - Ext: <ext> Time: --:--
3. Enter the wakeup time in the 4-digit hh:mm format (hour:minute).
WAKEUP MESSAGE: XXXX
AUTO WAKEUP - Ext: <ext> Time: <hh:mm> -M
4. Press the
wakeup call.
WAKEUP MESSAGE: XXXX
5. The display shows the default wakeup message number. If you want to use
the default message, go to
button.
Auto wakeup
The Auto Wakeup lamp goes on.
The following displays:
button. (If you make a mistake, press the
#
button again, and start over.)
The following displays:
If a wakeup request already exists for the room, the time field will
show the time of the request.
If you entered a time between 13:00 and 00:59, the following
displays if the request is accepted; if the request is denied, see the
reasons under step 11:
Go on to
Step 5.
If you entered a time between 01:00 and 12:59, the following
displays:
button for an A.M. wakeup call, or press the
2
The following displays if the request is accepted; if the request is
denied, see the reasons under step 11:
Step 7.
Issue 1
November 2000
34
button to
#
auto
button for a P.M.
7
Advertisement
Table of Contents
