Table of Contents
Advertisement
GuestWorks and DEFINITY ECS Release 9
Hospitality Operations 555-231-742
Hospitality Operations
Front Desk Operations
Change Class of Restriction (COR) by Feature Access Code (FAC)
A user with console permissions (COS) can change, via his/her telephone or
attendant console, Class of Restriction (COR) values for one or more telephones
or attendant consoles. This is done using a feature access code that has been
defined by the system administrator. After COR values for other local users have
been changed, those users will be permitted to use additional features and/or have
additional calling abilities. Previously, only a system administrator could change
COR values by using the system access terminal (SAT).
To change a COR by FAC, do the following:
1. Press the
2. Enter the Change Class of Restriction Feature Access Code
_____ .
3. If the password option is enabled, you will hear dial tone a second time.
Enter the password for the feature. If the password option is not enabled,
continue to Step 4.
If the password you entered is incorrect, you will hear intercept tone, and
the call will be dropped. If this is the case, press the
up, and start over again.
button or an idle call appearance button.
start
You hear dial tone.
The call appearance lamp goes on.
The Position Available lamp goes off.
The system will then verify that you have COS permissions.
— If you have COS console permissions, the system will then
verify that you are local to the system.
— If you do not have COS permissions, you will hear intercept
tone, and the call will be dropped. If this is the case, press the
button, and start over again.
cancel
If the system determines that you are local to the system, continue to
Step 3.
Issue 1
November 2000
button, or hang
cancel
49
Advertisement
Table of Contents
