Chrysler 2000 LHS Owner's Manual page 1418

LH
REMOVAL AND INSTALLATION (Continued)
INSTALLATION
(1) Align rear end cap in position on console.
(2) Install rear end cap attaching screws.
(3) Push forward at the bottom to lock tabs in
position.
Fig. 79 Floor Console End Cap
1 – FASTENERS
2 – LOCATOR PINS
3 – TABS
1 – INSTRUMENT PANEL
2 – FASTENERS
Fig. 80 Front Floor Console Side Panels – Concorde
FLOOR CONSOLE
REMOVAL
(1) Remove shift knob.
(2) Remove floor console shift bezel.
(3) Disconnect wire connectors.
(4) Remove side panels (Fig. 80), or (Fig. 81).
(5) Remove fasteners attaching forward bracket to
instrument panel.
(6) Remove fasteners attaching bottom of console
storage bin to rear mounting bracket (Fig. 82).
(7) Remove floor console from vehicle.
INSTALLATION
(1) Place center console in position on vehicle.
(2) Install fasteners to attach forward bracket to
instrument panel.
(3) Install fasteners to attach bottom of console
storage bin to rear mounting bracket.
(4) Install side panels.
(5) Install center console shift bezel.
(6) Install shift knob.
3 – CLIPS
4 – SIDE PANEL
BODY 23 - 67