Chapter 3
CLI Command
Setting the System Clock
Web Agent
Procedure
3-10
To set Summer Time Hours that are not based on a standard rule using the
CLI, enter the following command from Configure mode:
(configure)# clock summer-time date
The system clock is used for setting traps, alarms, and other events on the
switch.
* Note: You must set SNTP and Summer Time Hours before you can set
the system clock. See
Protocol" and
chapter.
* Note: The system clock does not automatically change with Daylight
Savings Time.
You can set the system clock from either the Web Agent or the CLI.
To set the system clock using the Web Agent:
1. Select System Clock from the System > Configuration group on the Web
Agent window. The System Clock dialog box opens
Figure 3-6. System Clock Dialog Box
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
"Enabling the Simple Network Time
"Setting Summer Time
Hours" earlier in this
(Figure
3-6).