Chapter 2 - Setting Up The Switch; Overview - Avaya P580 User Manual

Multiservice switches

Hide thumbs Also See for P580:

Table of Contents

User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0

Setting Up the Switch

The following information and procedures that are provided in this chapter

are common to both layer 2 and layer 3 module:

Setting Up Your Laptop or PC

Performing Initial Setup of the Switch

Using Telnet to Manage the Switch

Using the Web Agent to Configure the Switch

Configuring Custom Access Types

Configuring User Accounts

Changing the Console Serial Port Settings

Configuring Dial-Up Networking

Changing the TCP Ports for HTTP and Telnet

Managing Configuration Files

* Note: The last step in each procedure tells you to Click APPLY to

save the setup or changes that you made. This step saves the

setup or any changes to the running configuration only. The

startup configuration is not changed. Therefore, these and

other changes will be lost if the switch goes down or if you

turn it off.

To save any changes to the startup configuration, you must

copy the running configuration to the startup configuration.

For information on how to perform this task, see

Configuration

For more information about the CLI commands that are mentioned in this

chapter, see Command Reference Guide for the Avaya P580 and P882

Multiservice Switches, Software Version 6.0.

Files" later in this chapter.