Chapter 2
Deleting a User Account
Web Agent
Procedure
CLI Command
Changing the Console Serial Port Settings
2-24
To delete a user account:
modify a user account:
1. In the navigation pane, expand the System > Administration folders.
2. Click User Accounts. The User Account Management Web page is
displayed in the content pane. See
3. In the User Name field, select the user account that you want to delete.
4. Click Delete. The Delete User Account Web page is displayed in the
content pane. See
Figure
Figure 2-13. Delete User Account Web Page
5. Click YES to delete the user account.
To delete a user account, use the following CLI command:
(configure)# no username <name>
You can change the communications settings for the serial port connection
located on the front panel of the layer 3 supervisor module from the Web
Agent. The switch's console port is initially configured as a TTY Console to
support a TTY connection. The layer 2 and layer 3 supervisor modules
allow you to reconfigure the console serial port as a PPP Console to support
a dial-in PPP connection using a modem.
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
Figure
2-9.
2-13.