CLI Command
Deleting a Custom Access Type
Web Agent
Procedure
Document No. 650-100-700, Issue 1
5. Click Apply to save the custom access type or Cancel to clear your
entries.
To modify a custom access type, use the following CLI command:
(configure)# set custom-access-type <catName> [sys-configuration
{ro | rw | none}] [module-port-mgmt {ro | rw | none}] [events-mgmt {ro |
rw | none}] [l2-switching {ro | rw | none}] [routing {ro | rw | none}]
* Note: Unlike the custom-access-type command that you use to create
a custom access type, you must specify read-only, read-write,
or no permission when you use the set custom-access-type
command to modify a custom access type.
To delete a custom access type:
1. In the navigation pane, expand the System > Administration folders,
and then click Custom Access Types.
The Custom Access Types Web page is displayed in the content pane.
See
Figure
2-5.
2. In the Type Name field, select the access type that you want to delete.
3. Click Delete.
The Delete Custom Access Type Web page is displayed in the content
pane. See
Figure
2-8.
Figure 2-8. Delete Custom Access Type Web Page
Setting Up the Switch
2-15