Chapter 3
Entering General System Information
Web Agent
Procedure
3-2
You can enter general information about your system by using either the
Web Agent or the CLI.
You can enter general system information using the following Web Agent
fields:
Switch name
Device location
Device contact
To enter general system information from the Web Agent:
1. Select General Information from the System group on the Web Agent
window. The General Information dialog box opens
Figure 3-1. System Information Window
2. Enter the switch name in the Name field.
3. Enter the location for the switch (for example, floor, closet in the
Location field.
4. Enter the person who should be contacted in the event of a problem in
the Contact field.
5. Click APPLY to save your changes, or CANCEL to clear your selection.
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
(Figure
3-1).