CLI Command
Disabling a User Account
Web Agent
Procedure
CLI Command
Document No. 650-100-700, Issue 1
3. In the Old Password field, enter your currently active password.
4. In the New Password field, enter a new password. Passwords can
consist of a maximum of 31 characters.
* Note: Do not use a combination of the following special
characters for the password ;, ?, \,(,),#, $,%, ^, &, or *.
5. In the Re-enter New Password field, reenter the password that you
entered in the New Password field.
6. Click APPLY.
To change your password, use the following CLI command:
> password <passwd>
For security reasons, you may want to disable certain user accounts, such as
the manuf and diag accounts.
To disable a user account:
1. Expand the System > Administration folders.
2. Click User Accounts. The User Account Management Web page is
displayed in the content pane. See
3. Select the manuf or diag account that you want to disable.
4. Click Modify. The Modify User Account Web page is displayed in the
content pane. See
Figure
5. In the Status field, select Disable.
6. Click APPLY.
To disable a user account, use the following CLI command:
(configure)# username <name> status disable
Figure
2-9.
2-11.
Setting Up the Switch
2-23