Configuring Vxlan Gateway; Connecting To An Nvp Controller - Dell S6100 Configuration Manual

You can create a logical network by creating a logical switch. The logical network acts as the forwarding domain for workloads on the
physical as well as virtual infrastructure.
Figure 151. Create Logical Switch
5 Create Logical Switch Port
A logical switch port provides a logical connection point for a VM interface (VIF) and a L2 gateway connection to an external network.
It binds the virtual access ports in the GW to logical network (VXLAN) and VLAN.
Figure 152. Create Logical Switch Port
NOTE: For more details about NVP controller configuration, refer to the NVP user guide from
VMWare .

Configuring VxLAN Gateway

To configure the VxLAN gateway on the switch, follow these steps:
1 Connecting to NVP controller
2 Advertising VXLAN access ports to controller

Connecting to an NVP Controller

To connect to an NVP controller, use the following commands.
1 feature vxlan
CONFIGURATION mode
feature vxlan
You must configure feature VXLAN to configure vxlan-instance.
2 vxlan-instance
CONFIGURATION mode
Virtual Extensible LAN (VXLAN) 999