Programming
(2) By dialing Location Number (PBX code) and Extension Number
Description
Programming example To make up the TIE Line Network above, the following system programming is
PBX-1
System Programming
"System-Operation(1/ 3)",
Numbering Plan
"System-Numbering Plan",
TIE Trunk Access
Other PBX Extension 01-16
"Special Attended-TIE Line Routing Table",
Code
Delete Digit
Insert Dial
Trunk Group Hunt Sequence
01-05
Extension users can make a call to other extension users in other PBXs within
a TIE line network by dialing a location number (PBX Code) and an extension
number. Each PBX in the same TIE Line Network can have its own flexible
extension numbering plan.
A Network of TIE Lines
Call Flow
1. Ext.100 of PBX-1 dials 84-951-100.
2. Ext.100 of PBX-1 is connected to Ext.100 of PBX-2.
required at PBX-1 and -2 respectively.
• System -Operation (1/3) (9-D-1.01, 10-C-4.00)
PBX Code: 950
• System - Numbering Plan (07/11)-TIE Trunk Access: 84 (default)
• Special Attended - TIE Line Routing Table (9-K-4.00, 10-C-65.01)
3-F-73
(70695)
Reference
VT
Dumb
9-D-1.01
10-C-4.00
9-D-6.00
10-C-10.00
9-D-6.10
9-D-6.11
9-K-4.00
10-C-65.01