Panasonic KX-T336 System Reference Manual page 394

Hide thumbs Also See for KX-T336:

Table of Contents

(2) Physical port number for each T-1 trunk channel is as follows:

X: Shelf No. (1=Basic, 2=Expansion 1, 3=Expansion 2)

(3) DN Assignment is required when a channel of T-1 card is assinged as "OPX."

(4) Select the external clock mode, if your system is interfaced by T-1 interface

with another exchange. Refer to Section 10-C-64.02 "System Clock Mode

(CLK)" and Section 10-C-64.03 "Master Clock Priority (CLP)."

The following two test commands are provided for T-1 DIGITAL TRUNK Card.

• Loop Back Test (LBT) - Section 15-E-3.01

• DTMF-Generator/Receiver Test (DTM) - Section 15-E-3.02

Show Quick Links

Table of Contents